How to set the depth of the engraving machine engraving signage?

You can pause the Z value in the G code, or change the path height (for the graphics classpath). Like engraving, you can change the z-direction displacement and the fine-tuning depth of the machining interface.

What is the difference between the engraving and signage of the advertising engraving machine?

1. The control board (Ncstudio) is loose or faulty.

2. The stepping motor of the engraving machine is faulty. Under normal circumstances, the motor itself has few faults, and most of the motor lines are in poor contact.

3. The driver fault or current subdivision is inconsistent with the software parameter settings.

4, z-axis motor line failure

5, the inverter interference or data settings are wrong, the voltage can also be unstable.

6, static interference.

7, computer virus or system problems.

8, the work platform is not flat.

9. The spindle motor is faulty.
What should I do if the advertising engraving machine has different depths of engraving signs?

1. Re-plug the control board. If the computer is powered off, use a small brush to clean it or wipe it with an eraser. Be careful not to remove the aluminum film.

2. In the off state, check if the lower motor line is in poor contact. You can reconnect it and try it.

3. Check if the indicator of the drive is displayed normally. If there are any problems in the subdivision, please consult the engraving machine factory technicians according to the situation.

4. The z-axis motor line fault can be quickly moved back and forth through the Z-axis. If there is a pause in the middle when moving up and down, there is no pause to prove that it is not a Z-axis motor line fault. If there is a pause, the motor line can be checked.

5, check whether the data settings are wrong, correct it if it is wrong, check whether the power supply is stable, unstable and let the technicians solve.

6. Connect the ground cable to the cabinet to remove the interference source.

7. Reinstall the computer system and control software.

8. Re-milling the working platform with a milling cutter. The countertop is generally a soft PVC material, and the path can be easily flattened.

9. Repair or replace the spindle.

10. If the above method can't solve the problem, you can contact the factory technician who purchased the machine to help solve it.
The depth of the engraving signage of the advertising engraving machine is introduced. What are the factors that affect the processing of the engraving machine?

1. The impact of power supply on processing is the most direct, mainly manifested by control system disorder. Each electronic device and each functional component of the CNC control system has a certain voltage and frequency range. The overload operation of any component inevitably leads to instability of the entire system. A common phenomenon is machining offset.

2, the impact of vibration is reflected in frequent broken tools, the surface is not smooth. The common reason is that the machine is touched during the machining process, the level of machine installation is unqualified, and there is a punch around.

3. Dust mainly affects the heat dissipation of electronic components and the sensitivity of photosensitive elements. Common phenomena include malfunction of the optical inspection, the CPU fan of the computer does not turn, and so on.

4. The main influence of ambient temperature and humidity on the performance of the control system and the performance of the drive motor. When the ambient temperature exceeds 40 degrees, the control system may have erroneous control, and the driving torque of the drive motor may not reach the rated value.