The stone engraving machine is the main product of Warwick CNC-Jinan Huajie CNC Equipment Co., Ltd. The machine has high precision, high speed and great strength. It is suitable for granite, marble, bluestone, jade, sandstone, tombstone, ceramic tile, glass, metal, etc. 3D relief of hard materials, 2D engraving, cutting, chamfering and drilling. To maintain the durability and high precision of the machine, daily maintenance is very important. Please pay attention to the following points:
1. Routine maintenance work should be performed after the engraving machine cuts off the power and the monitor and main circuit power indicator are off.
2. Stone engraving machine The machine cooling device is a water cooling system. It is necessary to ensure the normal operation of the pump and regular replacement of the cooling water to ensure its cleanness. The water spindle motor must not be dehydrated to prevent the water temperature from being too high. In winter, pay attention to the warmth of the engraving machine. The residual water in the water pipe and water pump should be cleaned in time to avoid the water circulation after the next day's freezing. Secondly, it is necessary to keep the dry humidity inside the plant. The relative humidity of the machine is 30%-75. Between %, too dry or too humid environment is detrimental to the optimal operation of the engraving machine control and power system.
3. After the stone engraving machine is used, clean the dust on the platform and the transmission system, and regularly apply lubricating oil to the transmission system. (Note: X, Y, Z three-axis polished rod oil; screw with high-speed butter; If the temperature of the working environment in winter is too low, the screw and polished rod should be cleaned with gasoline first, then the oil is added, otherwise the resistance of the machine transmission is too large and the machine is misaligned.
