During the production process of the woodworking engraving machine, the staff will try to optimize the engraving process to shorten the working time required, but many people may not have thought that optimizing the machining path setting of the wood engraving machine can also improve the working efficiency. . How to set up or modify the processing path setting to improve production efficiency, why modify the processing path can improve production efficiency. Next, follow the CNC network Xiaobian to learn about the woodworking engraving machine working path modification. Optimize the woodworking engraving machine path method related content!
In the engraving software, the user can edit and modify the generated two-dimensional path. When editing, first select the path graphic we need to edit, and then click “Engraving Path Edit” under “Path Calculation”, the toolbar of the engraving path editing will appear, and the path to be edited will be selected. Can be used), edit and modify.
The first item of the toolbar is to define the starting point, and the starting point of the engraving can be arbitrarily specified in the engraving path; the second item is reversed, that is, the selected path is changed to the opposite direction; the third item is disconnected, and the function is utilized. You can increase the position of the ribs arbitrarily; the fourth item is sorting, you can sort the selected paths in order; the last item is saved, but we must not forget to save after we modify it. For the insurance period, the program is loaded into woodworking carving. After the machine, you should first simulate the preview to avoid errors.
How to set the engraving start position of the engraving machine, the starting position is mostly set in the lower left corner or the center, and manually move the knife to the required starting point to set the program path of the CNC engraving machine.
First set the starting point, you can define any point in the engraving path of the CNC engraving machine as the starting point of the engraving path to change the position of the falling point during machining. We can adjust the starting position according to the requirements of the machining process. The second is to set the path reversal, and change the engraving path of the selected CNC engraving machine to the opposite direction, so that the machining direction is consistent with the texture of the processed material. Make the processing effect more perfect. Once again, design the arc fit. For tool paths and machining calculations, the results obtained using the arc curve are better than the short fold lines. It can significantly reduce toolpaths, save machining time, and make the machined curve smoother.
Finally, the ribs are set: the ribs are set to avoid the damage or processing error of the machined parts caused by the movement of the object before the end of the machining, and the workpieces are not completely disconnected. Separate them by hand. We can make the material reinforcement in the position where there is no processing requirement.
