Advertising engraving machine precision debugging?

1. Before the advertising engraving machine leaves the factory, the machine will mill one side of the platform, on the one hand to ensure the level of the platform, and on the other hand, to check the verticality of the main shaft relative to the table by the milling platform. The flatness of the platform and the verticality of the spindle directly affect the accuracy of the stone engraving machine. If the platform and the spindle can be completely vertical, then the friends who do the engraving and embossing will definitely not be able to process beautiful samples.

2, in order to ensure the plasticity of the engraving platform, the general engraving machine manufacturers mostly use PVC material and hard electric wood board to be laid on the top of the platform. The engraving machine takes a long time to process, and the PVC platform will become uneven, and the horizontal or vertical knife marks or the indentations left by hard objects. At this point, the PVC material embodies its benefits. We can install the upper milling cutter on the main shaft, program the program, and mill the PVC platform all the way, so that the table can be restored to a very flat state.

3. When there is very little left in the milling, you can stick a layer of board on the pvc, so you can use it repeatedly and repeatedly. A 1325 model machine can be completely milled in less than 20 minutes. If it is a metal countertop, I am afraid it will be milled for a few hours.

Is the accuracy of the optional advertising engraving machine important? A good bed is the beginning, good assembly is the standard of a good machine, the method of inspection is accuracy. The big characters are useless, so the small characters are used to see who has the high precision and good effect.

What are the precautions for loading and unloading the advertising engraving machine?

1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.

2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.

4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise it will easily generate vibration during the machining process, which will affect the processing quality of the workpiece surface.

5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.

6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.

7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first screw it in place with no effort.

8. When unloading the knife, use an air gun to clean the dust on the pressure cap and the rotor shaft before unloading the knife.

Advertising engraving machine head maintenance?

1. Clean up the dirt in time.

2, regular inspection, worn Hu will replace the advertising engraving machine cutter head.

3. Use the corresponding head to cut.