Woodworking engraving machine engraving misplaced reason

In the use of woodworking engraving machine, once the misalignment occurs, it will have a great impact on the production and processing work. If you want to solve the problem quickly and effectively, you should first know what the cause of the accident is.

1, the fuselage itself: a certain part of the machine tool has a problem or a little loose, the surface is contaminated, etc. It will also be a misplaced imagination. If the coupling is loose, broken, there will be misplacement , rails, screw on the time is not cleaned and refueling will also appear misplaced.

2, the reason of the driver: the structure of the drive itself or the problem of electronic components will also cause misalignment, this reason is the most. If the number of occurrences is not much, and the speed is lowered, sometimes it can be normal Engraving shows that the drive is still not completely broken. If it is misplaced at the beginning, it has already indicated that the drive is completely broken. This can repair or worse drive.

3, interface board, motherboard, adapter board reasons: If the interface board, motherboard, adapter board is broken, the machine is in the process of working, a certain direction or three axes are not moving, which will also cause engraving dislocation.

Woodworking engraving machine should be operated correctly

    The woodworking engraving machine is a wood processing machine. This is controlled by a computer. It is set on the computer, the computer is started to give the machine a command, and the engraving machine will start to work. Using USB interface to transfer data, the system also has a memory capacity of more than 32M, save files can be completely separated from the computer, and other typesetting, so that the machine work efficiency began to improve.
    It is possible to use this engraving machine to engrave on crystal, copper and aluminum products, just follow the correct method of operation. If the operation is mistaken during use, the machine will wear out and damage the machine for a long time. The consequence is that the machine cannot be used. The current engraving machine is not very cheap. The cost of purchasing one is not too small. It is required to understand the operation method when using it, and correct operation, no technical problems.
    The use of machinery and equipment can shorten the working hours and make it easier for people to work. Before using this engraving machine, you should check whether the machine parts are damaged. Do not use them when engraving. When the engraving is in progress, people are required to check it. If there is a problem, stop the machine and perform timely maintenance. If you don't know how to operate the engraving machine, you can consult the woodworking engraving machine manufacturer. You can also find out about some unclear parts of the machine manual. To be proficient in operating the machine is also a process, first recognize the machine, according to the method.